NCVT Online Ministry of skill development & (NCVT) National Council for Vocational Training
Online Learning Portal For ITI Students Fitter, Macninist, Turner etc, NIMI Nimi book pattern questions
ITI CBT Demo Practice Set Click Here
Q1. ब्रिटिश प्रणाली में गज की इकाई होती है? | Is there a unit of yards in the British system?
(a) गज | Yards
(b) फुट | Feet
(c) इंच | Inches
(d) ये सभी | All of these
Ans: b
Q2. रोलर की लम्बाई व्यास की कितने गुना अधिक होने पर उसे नीडिल बियरिंग कहते हैं? | When the length of the roller is more than the diameter, it is called a needle bearing.
(a) 2
(b) 3
(c) 4
(d) 5
Ans: d
Q3. बेलनाकार टर्निग करते समय कट की गहराई निम्न प्रकार दी जाती है | The depth of cut for cylindrical turning is given as
(a) टॉप स्लाइड का प्रयोग करके | using the top slide
(b) कम्पाउण्ड स्लाइड का प्रयोग करके | using compound slide
(c) क्रांस स्लाइड का प्रयोग करके | using cross slide
(d) टूल को पुनः एडजस्ट करके | re-adjusting the tool
Ans: c
Q4. जॉकी पुली ड्राइव का प्रयोग किया जाता है | jockey pulley drive is used
(a) स्पर्श की चाप बढ़ाने के लिए | to increase the arc of touch
(b) बैल्ट को तनाव में लाने के लिए | to tension the belt
(c) ड्राइव पुली की दिशा बदलने के लिए | To change the direction of the drive pulley
(d) उपरोक्त (क) और (ख) दोनों | both the above (a) and (b)
Ans: d
Q5. भारतीय मानक पद्धति में टॉलरेन्स के कितने ग्रेड दिए गए हैं? | How many grades of tolerance are given in the Indian Standard System?
(a) 5
(b) 9
(c) 15
(d) 8
Ans: d
Q6. भारतीय पद्धति में होल साइज को अंग्रेजी वर्णमाला के किन अक्षर द्वारा दर्शाया जाता है? | In Indian system the hole size is represented by which letter of the English alphabet?
(a) छोटे | Small
(b) कैपिटल | Capital
(c) इटालिक | Italic
(d) इनमें से कोई नहीं | none of these
Ans: b
Q7. किस सिस्टम को अपनाने से उत्पादन लागत कम आती हैं? | Adopting which system reduces production cost?
(a) होल बेरिस सिस्टम | Hole Basic system
(b) शाफ्ट बेसिस सिस्टम | Shaft Basic system
(c) A व B दोनों | Both A and B
(d) इनमें से कोई नहीं | None of these
Ans: a
Q8. कौनसी धातु गैल्वेनाइज करने के लिए प्रयोग करते हैं? | Which metal is used for galvanizing?
(a) लेड | Lead
(b) जिंक | Zinc
(c) टिन | Tin
(d) कॉपर | Copper
Ans: b
Q9. वाइस क्लेम्पो का प्रयोग किया जाता है । | Vice clamp is used
(a) जॉब की फिनिश की हुई सरफेस को बचाने के लिए | To protect the finished surface of the job
(b) जॉब को अच्छी तरह से पकड़ने के लिए | to hold the job well
(c) वाइस के खाचे कटे जॉस को बचाने के लिए | To save the cut joss of the vice
(d) फाइल को खराब होने से बचाने के लिए | To protect the file from getting corrupted
Ans: a
Q10. कल्पना करें कि आपको एल्युमिनियम के थ्रेड काटने हैं। आप निम्नलिखित से किस शीतलक का प्रयोग करेंगे? Imagine that you have to cut aluminum threads. Which of the following coolant would you use?
(a) विलेय तेल (सॉल्युबल ऑएल)
(b) सूकर तेल (लाई ऑएल)
(c) मिट्टी का तेल (केरोसिन)
(d) वनस्पति तेल (वेजीटेबल ऑएल)
Ans: c
Q11. दबाव देने से रक्त स्राव ....... जाता है। | Bleeding due to pressure causes…….
(a) बढ | Increase
(b) घट | Decrease
(c) रुक | Freeze
(d) इनमें से कोई नहीं | None of these
Ans: c
Q12. पाइपलाइन में बिना बाधा डाले कनेक्शन को अलग करने के लिए निम्नलिखित में से किसका प्रयोग किया जाता है? | Which of the following is used to isolate the connection without interruption in the pipeline?
(a) Union
(b) Plug
(c) Socket
(d) Cross
Ans: a
Q13. निम्न में से कौनसा दुर्घटना का कारण नहीं है? | Which of the following is not a cause of accident?
(a) मशरूम हेड चीजल | Mushroom Head Chazel
(b) फैले मुंह का स्पैनर | Sprained mouth spanner
(c) कसा हुआ वर्नियर | Tight Vernier
(d) टाइट कसा आरी का ब्लेड | Tight is the saw blade
Ans: d
Q14. एक डायल परीक्षण सूचक ( dial test indicator ) के । प्लंजर की रेखीय गति को पोइंटर की पॉइटर की रोटरी गति में परिवर्तित करने के लिए निम्नलिखित तंत्र का इस्तेमाल किया जाता है | A dial test indicator. The following mechanism is used to convert the linear motion of the plunger into the rotary motion of the pointer.
(a) Quick return mechanism
(b) Rack and pinon mechanism
(c) Screw thread mechanism
(d) Hydraulic mechanism
Ans: b
Q15. ऐगल प्लेट कितने ग्रेड में पाई जाती है । | How many grades of angle plate are found.
(a) A B & C grade
(b) A & B
(c) 1 & 2
(d) All of these
Ans: c
Q16. ट्राई स्क्वायर का कोण होता है । | Try Square is the angle
(a) 90°
(b) 100°
(c) 90°
(d) 60°
Ans: a
Q17. लकड़ी से बने हॅमर को कहते है । | Hammer made of wood is called.
(a) Ball pen hammer
(b) Mallet hammer
(c) Claire Hammer
(d) Sled hummer
Ans: b
Q18. 63 सेंटीमीटर से अधिक और 200 मिलीमीटर तक के पाइपों को पकड़ने के लिए निम्नलिखित में से किसका प्रयोग किया जाता है? | Which of the following is used to hold pipes of more than 63 cm and up to 200 mm.
(a) Pipe wrench
(b) Pipe vice
(c) Chain pipe vice
(d) Fut Rench
Ans: c
Q19. लौहकारी में जॉब को गर्म करने वाली भट्टी को कहते हैं | In the ironwork, the furnace that heats the job is called
(a) फुलर | Fuller
(b) स्वैज | Swages
(c) फोर्ज | forge
(d) चिपिंग | Chipping
Ans: c
Q20. तापमान ....... रहने से जॉब में दरारें आ जाती हैं। | With the help of temperature ....... there are cracks in the job.
(a) ज्यादा | More
(b) कम | Less
(c) सामान्य | Normal
(d) इनमें से कोई नहीं | none of these
Ans: b
Q21. जरनल बियरिंग ( Journal bearing ) में कार्यरत दाब होता The pressure employed in journal bearing would be.
(a) शाफ्ट की अक्ष के लम्बवत्
(b) शाफ्ट की अक्ष के समानान्तर
(c) शाफ्ट की अक्ष से आनत ( Inclined )
(d) उपरोक्त में से कोई नहीं
Ans: a
Q22. कार्बुरेटर का मुख्य भाग है | The main part of the carburetor is
(a) प्लॉट चेंबर | Plot Chamber
(b) चोक वाल्व | Choke valve
(c) थ्रोटल वाल्व | Throttle valve
(d) उपरोक्त सभी सही है | All above is correct
Ans: d
Q23. CRO का पूरा नाम - Full name of CRO -
(a) Carbon Ray Oscilloscope
(b) Carbon Resistant Operator
(c) Cathode Resistant Oscilloscope
(d) Cathode Ray Oscilloscope
Ans: d
Q24. ग्राइण्डिग व्हील का ग्रेड 'A' कैसा बॉण्ड प्रदर्शित करता है? | What does the 'A' grade of Grinding Wheel display?
(a) कठोर | Hard
(b) मुलायम | Soft
(c) बहुत अधिक कठोर | Very hard
(d) उपर्युक्त में से कोई नहीं | None of the above
Ans: b
Q25. स्टेनलेस स्टील किन टूलों में प्रयोग किया जाता है? | What are the stainless steel used in the tools
(a) सामान्य टूल्स में | In general tools
(b) सर्जिकल टूल्स में | ।n surgical tools.
(c) मेजरिंग टूल्स में | in the Majoring Tools
(d) इनमें से कोई नहीं | None of these
Ans: b
Q26. जानें टेपर पाए जाते हैं | Journe tapers are found
(a) 1 to 12
(b) 1 to 20
(c) 1 to 50
(d) 1 to 2
Ans: b
Q27. एयर ब्रेक सामान्य रूप से प्रयोग होते हैं | Air brakes are commonly used
(a) In cars
(b) In jeeps
(c) In trucks
(d) Three-wheeler
Ans: c
Q28. क्लच प्लेट बनी होती है | Clutch plate is made
(a) स्टील की पत्तियों द्वारा | By steel leaves
(b) कास्ट आयरन द्वारा | Cast iron
(c) टीन की चादर द्वारा | By the tin sheet
(d) उपरोक्त सभी | All of the above
Ans: b
Q29. लैपिंग निम्न के परिष्करण की प्रक्रिया है। | Lapping is the process of finishing the following.
(a) केवल बाहरी सतह | External surface only
(b) केवल आन्तरिक सतह | Only internal surface
(c) बाह्य और आन्तरिक सतह | External and internal surface
(d) केवल चपटी सतह | Flat surface only
Ans: c
Q30. निम्नलिखित में से किस ऐंगल को बनाने से टूल की बॉडी वर्कपीस के साथ रगड़ नही खाती है | Creating which of the following angles does not rub with the body workpiece of the tool
(a) Rank Angle
(b) Helix angle
(c) Clearance angle
(d) None in the
Ans: c
Q31. लेपिंग पर एबेसिव ग्रेन के एमवेण्डिग की विधि को कहते है | The method of emending abrasive grains on coating is called
(a) Raving
(b) Charging
(c) Fiveling
(d) Lapping
Ans: b
Q32. वुडरफ कुजी की आकृति होती है | The shape of a Woodruff key is
(a) बेलनाकार | Cylindrical
(b) अर्धवृत्ताकार Semicircular
(c) चपटी | Flat
(d) वृत्ताकार | Circular
Ans: b
Solution:
Q33. निकल का गलनाक होता है। | Nickel is the melting point.
(a) 1600°C
(b) 1200°C
(c) 1453°C
(d) All of these
Ans: c
Q34. टर्निंग के लिए लेथ मशीन पर ....... प्वॉइण्ट टूल प्रयोग होते हैं। | Point tools are used on lathe machines for turning.
(a) Single
(b) Double
(c) Multi
(d) None of these
Ans: a
Q35. पुली पर स्पर्श के क्षेत्र के मध्य पुली के फेस पर बैल्ट के इधर-उधर सरकने (Movement) को कहते है | On the face of the bridge in the middle of the area of touch on the pulley is called Movement around the belt.
(a) Creeping
(b) Crowning
(c) Slipping
(d) Dressing
Ans: a
Q36. निम्न में से कौन सा पुली का भाग नहीं है | Which of the following is not a part of the bridge?
(a) Face and Rim
(b) Bore and K Waze
(c) Hub
(d) Shaft
Ans: d
Q37. बुल गियर व्हील निम्न द्वारा चलाया जाता है। | The Bull Gear Wheel is run by following
(a) by shaft
(b) by pinion
(c) None of the above
(d) By sliding block
Ans: b
Q38. भारतीय मानक संस्थान के अनुसार 0.6 से 25 मिमी साइज के रेडियस कितने सेटों में पाए जाते हैं? | According to the Indian Institute of Standards, how many sets of radios of 0.6 to 25 mm are found in the set?
(a) 2
(b) 3
(c) 4
(d) 6
Ans: c
Q39. मशीन में टेपरित शैक ड्रिल को पकड़ने के लिए किसका प्रयोग करते हैं? | Which machine do you use to capture the tapered shank drill in the machine?
(a) चक | (chucks)
(b) खोल | (sleeves)
(c) ड्रिफ्ट | (drift)
(d) वाइस | (vice)
Ans: b
Q40. माइक्रोमीटर के एनविल किस धातु के बने होते हैं? | What are the minerals of the micrometre made of metal.
(a) टंगस्टन कार्बाइड | Tungsten carbide
(b) हाई स्पीड स्टील | High speed steel
(c) हाई कार्बन स्टील | High carbon steel
(d) उपर्युक्त में से कोई नहीं | None of the above
Ans: a
Q41. स्पैनर किस स्टील के बनाए जाते हैं? | Spanner are created which steel?
(a) Mild
(b) Vanadium
(c) Both A and B
(d) None of these
Ans: b
Q42. शीट के किनारे मोड़ने के लिए किस हैमर का प्रयोग करेंगे? | Which Hammer will you use to fold the edge of the sheet?
(a) ball pan hammer
(b) Straight Pan Hammer
(c) Cross Pan Hammer
(d) Cla Hammer
Ans: c
Q43. सर्फेस गेज किस प्रकार का टूल है? | What type of tool is Surface Gauge?
(a) Marking Tools
(b) Measuring Tools
(c) Checking tools
(d) Marking and checking tools
Ans: d
Q44. B.S.W थ्रेडस का कोण --- होता है। | The angle of BSW threads is
(a) 29°
(b) 45°
(c) 55°
(d) 60°
Ans: c
Q45. वैल्डन करते समय रॉड का वैल्ड रेखा से उचित कोण निम्न है The proper angle of the rod with the weld line while welding is
(a) 30° - 45°
(b) 45° - 60°
(c) 60° - 70°
(d) 70° - 80°
Ans: c
Q46. किस प्रकार के बियरिंग वियर के एडजस्टमेंट की व्यवस्था होती है What type of bearing wear adjustment system is there?
(a) Solid bearings
(b) Split bearings
(c) Self Aligning Bush Bearings
(d) Adjustment Slight Bearings
Ans: d
Q47. फाईल का साइज लिया जाता है । The size of the file is taken.
(a) Point to tang
(b) Point to heel
(c) File of length
(d) File of cut
Ans: b
Q48. मशीनों की प्रतिदिन कार्य करने से पहले की जाने वाली देखभाल को कहते हैं। | The care that is taken before the daily work of machines is called.
(a) Preventive maintenance
(b) Routine maintenance
(c) Alignment
(d) Breakdown maintenance
Ans: b
Q49. गरम जॉब में पंच द्वारा बने सुराख को सही आकार देकर फिनिश करने की प्रक्रिया को कहते हैं। | The process of finishing the hole made by the punch in the hot job by giving it the correct shape is called.
(a) Drawing
(b) Wedding
(c) Jumping
(d) Drafting
Ans: d
Q50. सोल्डर का गलनांक..............है। The melting point of the solder is ...............
(a) 205°C
(b) 800°C
(c) 1200°C
(d) 900°C
Ans: a
51. बेंच वाइस(BIS) के अनुसार यह प्राय किस साइज में पाई जाती है?/According to Bench Vice (BIS), in which size is it usually found?
(a) 50 to 100 mm
(b) 75 to 150 mm
(c) 80 to 200 mm
(d) 100 to 200 mm
Ans. (B)
52. बड़े कार्यों में प्रयोग होने वाली वाइस/vice used in big work.
(a) 100mm
(b) 200mm
(c) 150mm
(d) 250mm
Ans.(C)
53. बेंच वाइस का प्रयोग किन कार्यों को अच्छी तरह से पकड़ने के लिए किया जाता है?/What functions are bench vices used to hold well?
(a) Filing
(b) Chipping
(c) Hacksawing
(d) All of these
Ans.(D)
54. बेंच वाइस एक प्रकार का है।/Bench Vice is one type.
(a) Holding device
(b) Locking device
(c) Makeshifter.
(d) Cutting Tool
Ans.(A)
55. बेंच वाइस को फिट करते समय उसके ऊपरी फेस की ऊंचाई होनी चाहिए।/When fitting the bench vice, it should have the height of its upper face.
(a) कारीगर की कोहनी की ऊंचाई के बराबर।/Equal to the elbow height of the artisan.
(b) कारीगर के कंधे के बराबर।/Equivalent to the artisan's shoulder.
(c) फर्श से आधा मीटर।/कारीगर के कंधे के बराबर।/Equivalent to the artisan's shoulder.
(d) None of these
Ans.(A)
6. बेंच वाइस का साइज लिया जाता है।/Size of bench vice is taken.
(a) अधिकतम पकड़ने की छमता।/Maximum capture capacity.
(b) जॉ की चौड़ाई।/Jaw width.
(c) वाइस कितनी लंबाई में खुल जाती है।/The length that the vice opens.
(d) None of these
Ans. (B)
57. बेंच वाइस की बॉडी बनी होती है/The bench is made of vice body.
(a) Gray Cast Iron
(b) Mild steel
(c) Gun metal
(d) Cast steel
Ans. (A)
58. बेंच वाइस का बॉक्स नट की धातु होती है।/Bench vice box is nut metal.
(a) Cast steel
(b) Mild steel
(c) Brass or Cu
(d) Cast Iron or Gun metal
Ans.(D)
59. बेंच वाइस के स्पिंडल पर कटी होती है।/The bench is cut on the spindle of the vice.
(a) V thread
(b) Squares thread
(c) Acme thread
(d) None of these
Ans.(B)
60. जॉ प्लेट किस धातु की बनाई जाती है?/Which metal is made of Jaw plate?
(a) Tool steel
(b) Cast Iron
(c) Mild steel
(d) None of these
Ans.(A)
71. फाइल की धातु होती है।/The file has a metal.
(a) Cast iron
(b) Mild steel
(c) Cast steel or Tool steel
(d) None of these
Ans.(C)
72. फाइल की लंबाई मापी जाती है।/File length is measured.
(a) पॉइंट से होल्डर तक।/From point to holder.
(b) प्वाइंट से टैंग तक/Point to Tang
(c) पॉइंट से हील तक।/From Point to Heal.
(d) None of these
Ans. (C)
73. फाइल का कौन सा भाग हार्ड नहीं होता है?/Which part of the file is not hard?
(a) Body
(b) Point
(c) Tang
(d) Solder
Ans. (C)
74. फाइल का फेस कुछ उभरा होता है जिसे कहते हैं?/What is the face of the file called something?
(a) Convexcity of file
(b) Taper of file
(c) Pining of file
(d) Increment cut file
Ans.(A)
75. फाइल के face पर प्रति वर्ग सेंटीमीटर दांतो की संख्या को कहते हैं।/The number of teeth per square centimeter is called on the face of
(a) Cut
(b) Grade
(c) Size
(d) None of these
Ans.(B)
76. साधारण फाइल की लंबाई में कितना भाग taper में किया जाता है?/How much of the length of a normal file is done in a taper?
(a) 1/3
(b) 2/3
(c) All
(d) Half
Ans.(A)
77. फाइल का अग्रिम भाग taper बनाया जाता है।/The front portion of the file is made taper.
(a) सुंदरता के लिए।/For beauty.
(b) ताकि कम चौड़ाई के ग्रूव्य स्लॉट में प्रयोग किया जा सके।/So that it can be used in groove slots of lesser width.
(c) ताकि फाइल टूटे नहीं।/So that the file is not broken.
(d) None of these
Ans.(B)
What is Drawing Scale पैमाना क्या है
78. सेकंड कट फाइल होती है।/Second cut is a file.
(a) According to grade
(b) According to cut
(c) According to grade or cut
(d) None of these
Ans.(A)
79. फ्लैट फाइल के दोनों एज पर होते हैं।/Flats are on both sides of the file.
(a) Single cut teeth
(b) Second cut teeth
(c) Double cut teeth
(d) None of these
Ans.(A)
70. सेफ एज फाइल का मुख्य प्रयोग होता है।/The main use of a safe edge file is.
(a) दांतो को जल्दी रगड़ने के लिए।/To rub teeth quickly.
(b) अच्छी फिनिश इन के लिए।/For a good finish in.
(c) वर्गाकार या आयताकार स्लॉट में फाइलिंग करते समय 90 डिग्री में बनी सही भुजा खराब नहीं होती।/When filing in square or rectangular slots, the right arm formed in 90 degrees does not deteriorate.
(d) None of these
Ans. (C)
91.जिस हैमर का भार 2 किलोग्राम से ज्यादा होता है उसे कहते हैं।The hammer which weighs more than 2 kg is called.
(a) Soft Hammer
(b) Ball pen Hammer
(c) Sledge Hammer
(d) Mallet
Ans.(C)
92.फिटिंग शॉप में प्रयोग होने वाले लकड़ी के बने हथौड़े को कहते हैं।This is a wooden hammer used in a fitting shop.
(a) Mallet
(b) Ball pen Hammer
(c) Cross Pen Hammer
(d) Sledge Hammer
Ans.(B)
93.जिस हैमर की पेन हैमर के हैंडल के सीध में होती है उसे कहते हैं।The hammer whose pen is aligned with the handle of the hammer is called.
(a) Straight Pen Hammer
(b) Cross Pen Hammer
(c) Sledge Hammer
(d) Ball pen Hammer
Ans.(A)
94. हैमर का वर्गीकरण किसके अनुसार किया जाता है?According to which hammer is classified?
(a) According to pen
(b) according to weight
(c) According to the appearance.
(d) According to weight and pen.
Ans.(D)
95. लोहे के बने हथौड़े को कहते हैं।It is called a hammer made of iron.
(a) Soft Hammer
(b) Hard Hammer
(c) Marking Hammer
(d) None of these
Ans.(A)
96. बॉल पेन हैमर की पेन आकार की होती है।Ball pens are ham-shaped pens.
(a) Square
(b) Round
(c) Straight
(d) Cross
Ans.(B)
97. जिस हैमर की बॉडी स्टील की बनी होती है और सिरों पर चमड़ा लगा है उस हैमर को कहते हैं।The hammer whose body is made of steel and has leather on the ends is called a hammer.
(a) Rawhide Hammer
(b) Sledge Hammer
(c) Cube
(d) Pen Hammer
Ans.(A)
98. लकड़ी से कीड़े निकालने के लिए हैमर उपयुक्त है।जिस हैमर की बॉडी स्टील की बनी होती है और सिरों पर चमड़ा लगा है उस हैमर को कहते हैं।The hammer whose body is made of steel and has leather on the ends is called a hammer.
(a) Cube
(b) Mallet
(c) Sledge Hammer
(d) Claw Hammer
Ans.(D)
99. स्ट्रेट पेन हैमर की पेन होती है।A straight pen is a hammer pen.
(a) In the right angle of the handle.
(b) In line with the handle.
(c) In the cross of the handle.
(d) Turned to the handle.
Ans.(B)
90. फिनिश पार्ट पर चोट लगाने के लिए हैमर प्रयुक्त होता है।Hammer is used to hurt the finish part.
(a) Led Hammer
(b) Pen Hammer
(c) Soft Hammer
(d) Sledge Hammer
Ans.(C)
91. अधिक बड़े व्यास के पाइपों को खोलने या कसने के लिए किस साधन का प्रयोग किया जाता है?Which instrument is used to open or tighten pipes of larger diameter?
(a) Pipe wrench
(b) Chain pipe wrench
(c) Slide wrench
(d) Monkey wrench
Ans. (B)
92. finishing किए जो पर मार्किंग या ड्रिलिंग संक्रिया करने के लिए निम्न में से किस साधन का प्रयोग किया जाता है?Which of the following means is used for finishing or marking or drilling operations?
(a) Vice clamp
(b) C clamp
(c) Tool maker clamp
(d) Double finger clamp
Ans.(C)
93. सी क्लैंप का फ्रेम निम्न में से किस धातु का बनी होती है?C clamp frame is made of which of the following metals?
(a) Close grain cast iron
(b) MS
(c) Plane carbon steel
(d) Wrote iron
Ans.(A)
94. एक साथ दो या दो से अधिक फ्लैटों को एक साथ बांधकर उन पर वेल्डिंग करने के लिए किस साधन का प्रयोग किया जाता है?Which instrument is used for welding two or more flats together by welding them together?
(a) Parallel clamp
(b) C clamp
(c) Universal clamp
(d) Bench vice
Ans.(B)
Q95. 1 इंच किसके बराबर होगा? / What is 1 inch equal to?
(a) 2.45 cm
(b) 25.4 mm
(c) Both A and B
(d) None of these
Ans: c
Q96. एमकेएस प्रणाली में लंबाई वजन में समय का मात्रक है। / Length is the unit of time in weight in the MKS system.
(a) Meter
(b) Kg
(c) Second
(d) All of these
Ans: d
Q97. एफपीएस सिस्टम में लंबाई द्रव्यमान व समय का मात्रक है। / In the FPS system, length is the unit of mass and time.
(a) Feet
(b) Pounds
(c) Second
(d) All of these
Ans: d
Q98. सीजीएस प्रणाली में लंबाई वजन में समय का मात्रक है। / Length is the unit of time in weight in the CGS system.
(a) Cm
(b) Gram
(c) Second
(d) All of these
Ans: d
Q99. 1 मीटर बराबर होगा। / 1 meter will equal.
(a) 1000 mm
(b) 100 cm
(c) 39.37"
(d) All of these
Ans: d
Q100. 1 किलोमीटर बराबर होगा। / 1 kilometer.
(a) 1000 mm
(b) 100000 cm
(c) 0.622 mile
(d) All of these
Ans: c
ITI CBT Demo Practice Set Click Here
YouTube Channel Link Click Here
Telegram/infotrade ITI Trade Classes Video, Notes, Latest Jobs Notification
⏩ t.me/infotradein
⏩Like us on Facebook Page
https://www.facebook.com/infotrade.in
किसी भी प्रकार की फीडबैक यदि आपको देनी है तो आप हमारे व्हाट्सएप 9259344454 या हमें infotrade007@gmail.com पर मेल कर सकते हैं